Colin Marriott March 23, 2017
--------------------------------------------------------
FreeRTOS-9.0.0-mips32-23Mar2017.zip
--------------------------------------------------------
This port provides support for MIPS32 cores.
Requirements:
This port is dependent on features provided by Codescape SDK.
To get the latest version visit the following website:
http://community.imgtec.com/developers/mips/tools/codescape-mips-sd...
You must use SDK v1.3 or higher.
Or if you're just installing the tools on their own, it must be v2015.06-xx
or higher.
You will also need FreeRTOS-9.0.0 official release which this release must be extracted on top of.
Features:
* Uses FreeRTOS V9.0.0
* Demos for both CI40 and Xilinx NEXYS4DDR fpga board
New Changes:
* Demo application builds libraries for both freeRTOS and lwip for mips32
* Demo for the Xilinx NEXYS4DDR fpga board
NB. The Xilinx NEXYS4DDR fpga board must be programmed with a suitable bitfile
supporting a mips m14kc processor.
Building the Demo for the CI40 target:
ARCH=interaptiv INTS=eic GIC_BASE_ADDRESS=0x1BDC0000 make
Building the Demo for the fpga target:
ARCH=m14kc make
NOTE: The compiler must be in your path. You'll need mips-mti-elf- toolchain
for mips32r2-r5 targets and mips-img-elf- for mips32r6 targets.
